AD 2001-14-08 R1
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | McDonnell Douglas Corporation | DC-10 Series (all) | Airworthiness Directives; McDonnell Douglas Model DC-10 Series Airplanes, Model MD-10 Series Airplanes, and Model MD-11 Series Airplanes |
| aircraft | McDonnell Douglas Corporation | MD-10-10F | Airworthiness Directives; McDonnell Douglas Model DC-10 Series Airplanes, Model MD-10 Series Airplanes, and Model MD-11 Series Airplanes |
| aircraft | McDonnell Douglas Corporation | MD-10-30F | Airworthiness Directives; McDonnell Douglas Model DC-10 Series Airplanes, Model MD-10 Series Airplanes, and Model MD-11 Series Airplanes |
Unsafe Condition
Failure of electric motors of the auxiliary hydraulic pump and associated wiring could result in fire at the auxiliary hydraulic pump and consequent damage to adjacent electrical equipment and/or structure.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Repetitive inspections of numbers 1 and 2 electric motors of the auxiliary hydraulic pump for electrical resistance, continuity, mechanical rotation, and associated wiring resistance/voltage; perform corrective actions if necessary.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
at intervals not to exceed 2,500 flight hours
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A, KDC-10), DC-10-40, DC-10-40F; Model MD-10-10F, MD-10-30F; and Model MD-11, MD-11F airplanes.
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
Auxiliary hydraulic pump
Applicability Source Text
Show captured applicability text from the source AD
AD Final Rules - 011408R1.pdf Copy URL Document Versions Feedback DetailsAttachments/Public Comments AD Number: 2001-14-08 R1 Document Type: AD Final Rules Docket Number: FAA-2004-18978 Subject Heading: Airworthiness Directives; McDonnell Douglas Model DC-10 Series Airplanes, Model MD-10 Series Airplan...Show more Subject: Auxiliary hydraulic pump Status: Current Citation: (Federal Register: September 1, 2004 (Volume 69, Number 169)) Citation Publish Date: 09/01/2004 Effective Date: 09/01/2004 Make: McDonnell Douglas Corporation Model: DC-10 Series (all) | MD-10-10F | MD-10-30F Product Type: Aircraft Product Subtype: Large Airplane Affected AD: Superseded AD: 2001-14-08 Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: Automatic Zoom Actual Size Page Fit Page Width 50% 75% 100% 125% 150% 200% 300% 400% 125% of 5 1 [Federal Register: September 1, 2004 (Volume 69, Number 169)] [Rules and Regulations] [Page 53336-53337] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr01se04-3] ––––––––––––––––––––––––––––––––––– DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2004-18978; Directorate Identifier 2004-NM-127-AD; Amendment 39-13780; AD 2001-14-08 R1] RIN 2120-AA64 Airworthiness Directives; McDonnell Douglas Model DC-10 Series Airplanes, Model MD-10 Series Airplanes, and Model MD-11 Series Airplanes AGENCY: Federal Aviation Administration, DOT. ACTION: Final rule; rescission. ––––––––––––––––––––––––––––––––––– SUMMARY: The FAA is rescinding an existing airworthiness directive (AD) that applies to certain McDonnell Douglas Model DC-10 series airplanes, Model MD-10 series airplanes, and Model MD- 11 series airplanes. That AD requires repetitive inspections of the numbers 1 and 2 electric motors of the auxiliary hydraulic pump for electrical resistance, continuity, mechanical rotation, and associated wiring resistance/voltage; and corrective actions, if necessary. We issued that AD to prevent various failures of electric motors of the auxiliary hydraulic pump and associated wiring, which could result in fire at the auxiliary hydraulic pump and consequent damage to the adjacent electrical equipment and/or structure. Since we issued that AD, we have determined that the inspection requirements are identical to the inspection requirements of another existing AD. DATES: Effective September 1, 2004. ADDRESSES: Use one of the following addresses to submit comments on this rescission. • DOT Docket Web site: Go to http://dms.dot.gov and follow the instructions for sending your comments electronically. • Government-wide rulemaking Web site: Go to http://www.regulations.gov and follow the instructions for sending your comments electronically. • Mail: Docket Management Facility; U.S. Department of Transportation, 400 Seventh Street, SW., Nassif Building, room PL-401, Washington, DC 20590. • Fax: (202) 493-2251. • Hand delivery: room PL-401 on the plaza level of the Nassif Building, 400 Seventh Street, SW., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. 2 You can examine the contents of this AD docket on the Internet at http://dms.dot.gov , or at the Docket Management Facility, U.S. Department of Transportation, 400 Seventh Street, SW., room PL-401, on the plaza level of the Nassif Building, Washington, DC. FOR FURTHER INFORMATION CONTACT: Ken Sujishi, Aerospace Engineer, Systems and Equipment Branch, ANM-130L, FAA, Los Angeles Aircraft Certification Office, 3960 Paramount Boulevard, Lakewood, California 90712-4137; telephone (562) 627-5353; fax (562) 627-5210. SUPPLEMENTARY INFORMATION: On July 2, 2001, the FAA issued AD 2001-14-08, amendment 39-12319 (66 FR 36441, July 12, 2001), which applies to certain McDonnell Douglas Model DC-10 series airplanes, Model MD-10 series airplanes, and Model MD-11 series airplanes. That AD requires repetitive inspections (at intervals not to exceed 6,000 flight hours) of the numbers 1 and 2 electric motors of the auxiliary hydraulic pump for electrical resistance, continuity, mechanical rotation, and associated wiring resistance/voltage; and corrective actions, if necessary. That action was prompted by reports that, during ground operations or when powered in flight by the air driven generator, the electric motors of the auxiliary hydraulic pump and associated motor feeder cables failed. The actions required by that AD are intended to prevent various failures of electric motors of the auxiliary hydraulic pump and associated wiring, which could result in fire at the auxiliary hydraulic pump and consequent damage to the adjacent electrical equipment and/or structure. Actions Since Previous AD Was Issued A proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to add a new airworthiness directive (AD), applicable to certain McDonnell Douglas Model DC-10-10, DC-10- 10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A, KDC-10), DC-10-40, and DC-10-40F airplanes; and Model MD-10-10F and MD-10-30F airplanes, was published in the Federal Register as a notice of proposed rulemaking (NPRM) on January 22, 2004 (69 FR 3036). The NPRM, Docket 2003-NM- 119-AD, would supersede AD 2001-14-08 to require that the repetitive inspections of the numbers 1 and 2 electric motors of the auxiliary hydraulic pump for electrical resistance, continuity, mechanical rotation, and associated airplane wiring resistance/voltage; and corrective actions, if necessary, be performed at reduced intervals (i.e., from 6,000 flight hours to 2,500 flight hours). That action was prompted by a report from Boeing that the original compliance time was not adequate, because another incident of failure of an electric motor of the auxiliary hydraulic pump had occurred during the interval between repetitive inspections. The proposed actions are intended to prevent various failures of electric motors of the auxiliary hydraulic pump and associated wiring, which could result in fire at the auxiliary hydraulic pump and consequent damage to the adjacent electrical equipment and/or structure. Since the issuance of AD 2001-14-08, we also issued AD 2004-05-20, amendment 39-13515 (69 FR 11504, March 11, 2004), applicable to certain McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, and DC-10-40F airplanes; Model MD-10-10F and MD-10-30F airplanes; and Model MD-11 and MD-11F airplanes. That AD requires modification of the installation wiring for the electric motor operated auxiliary hydraulic pumps in the right wheel well area of the main landing gear, and repetitive inspections (at intervals not to exceed 2,500 flight hours) of the numbers 1 and 2 electric motors of the auxiliary hydraulic pumps for electrical resistance, continuity, mechanical rotation, and associated airplane wiring resistance/voltage; and corrective actions if necessary. That action was prompted by several reports of failure of the auxiliary hydraulic pump systems. The requirements of that AD are intended to prevent failure of the electric motors of the hydraulic pump and associated wiring, which could result in fire at the auxiliary hydraulic pump and consequent damage to the adjacent electrical equipment and/or structure.
Document Text
Show stored source text (verify against official source)
AD Final Rules - 011408R1.pdf Copy URL Document Versions Feedback DetailsAttachments/Public Comments AD Number: 2001-14-08 R1 Document Type: AD Final Rules Docket Number: FAA-2004-18978 Subject Heading: Airworthiness Directives; McDonnell Douglas Model DC-10 Series Airplanes, Model MD-10 Series Airplan...Show more Subject: Auxiliary hydraulic pump Status: Current Citation: (Federal Register: September 1, 2004 (Volume 69, Number 169)) Citation Publish Date: 09/01/2004 Effective Date: 09/01/2004 Make: McDonnell Douglas Corporation Model: DC-10 Series (all) | MD-10-10F | MD-10-30F Product Type: Aircraft Product Subtype: Large Airplane Affected AD: Superseded AD: 2001-14-08 Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: Automatic Zoom Actual Size Page Fit Page Width 50% 75% 100% 125% 150% 200% 300% 400% 125% of 5 1 [Federal Register: September 1, 2004 (Volume 69, Number 169)] [Rules and Regulations] [Page 53336-53337] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr01se04-3] ––––––––––––––––––––––––––––––––––– DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2004-18978; Directorate Identifier 2004-NM-127-AD; Amendment 39-13780; AD 2001-14-08 R1] RIN 2120-AA64 Airworthiness Directives; McDonnell Douglas Model DC-10 Series Airplanes, Model MD-10 Series Airplanes, and Model MD-11 Series Airplanes AGENCY: Federal Aviation Administration, DOT. ACTION: Final rule; rescission. ––––––––––––––––––––––––––––––––––– SUMMARY: The FAA is rescinding an existing airworthiness directive (AD) that applies to certain McDonnell Douglas Model DC-10 series airplanes, Model MD-10 series airplanes, and Model MD- 11 series airplanes. That AD requires repetitive inspections of the numbers 1 and 2 electric motors of the auxiliary hydraulic pump for electrical resistance, continuity, mechanical rotation, and associated wiring resistance/voltage; and corrective actions, if necessary. We issued that AD to prevent various failures of electric motors of the auxiliary hydraulic pump and associated wiring, which could result in fire at the auxiliary hydraulic pump and consequent damage to the adjacent electrical equipment and/or structure. Since we issued that AD, we have determined that the inspection requirements are identical to the inspection requirements of another existing AD. DATES: Effective September 1, 2004. ADDRESSES: Use one of the following addresses to submit comments on this rescission. • DOT Docket Web site: Go to http://dms.dot.gov and follow the instructions for sending your comments electronically. • Government-wide rulemaking Web site: Go to http://www.regulations.gov and follow the instructions for sending your comments electronically. • Mail: Docket Management Facility; U.S. Department of Transportation, 400 Seventh Street, SW., Nassif Building, room PL-401, Washington, DC 20590. • Fax: (202) 493-2251. • Hand delivery: room PL-401 on the plaza level of the Nassif Building, 400 Seventh Street, SW., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. 2 You can examine the contents of this AD docket on the Internet at http://dms.dot.gov , or at the Docket Management Facility, U.S. Department of Transportation, 400 Seventh Street, SW., room PL-401, on the plaza level of the Nassif Building, Washington, DC. FOR FURTHER INFORMATION CONTACT: Ken Sujishi, Aerospace Engineer, Systems and Equipment Branch, ANM-130L, FAA, Los Angeles Aircraft Certification Office, 3960 Paramount Boulevard, Lakewood, California 90712-4137; telephone (562) 627-5353; fax (562) 627-5210. SUPPLEMENTARY INFORMATION: On July 2, 2001, the FAA issued AD 2001-14-08, amendment 39-12319 (66 FR 36441, July 12, 2001), which applies to certain McDonnell Douglas Model DC-10 series airplanes, Model MD-10 series airplanes, and Model MD-11 series airplanes. That AD requires repetitive inspections (at intervals not to exceed 6,000 flight hours) of the numbers 1 and 2 electric motors of the auxiliary hydraulic pump for electrical resistance, continuity, mechanical rotation, and associated wiring resistance/voltage; and corrective actions, if necessary. That action was prompted by reports that, during ground operations or when powered in flight by the air driven generator, the electric motors of the auxiliary hydraulic pump and associated motor feeder cables failed. The actions required by that AD are intended to prevent various failures of electric motors of the auxiliary hydraulic pump and associated wiring, which could result in fire at the auxiliary hydraulic pump and consequent damage to the adjacent electrical equipment and/or structure. Actions Since Previous AD Was Issued A proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to add a new airworthiness directive (AD), applicable to certain McDonnell Douglas Model DC-10-10, DC-10- 10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A, KDC-10), DC-10-40, and DC-10-40F airplanes; and Model MD-10-10F and MD-10-30F airplanes, was published in the Federal Register as a notice of proposed rulemaking (NPRM) on January 22, 2004 (69 FR 3036). The NPRM, Docket 2003-NM- 119-AD, would supersede AD 2001-14-08 to require that the repetitive inspections of the numbers 1 and 2 electric motors of the auxiliary hydraulic pump for electrical resistance, continuity, mechanical rotation, and associated airplane wiring resistance/voltage; and corrective actions, if necessary, be performed at reduced intervals (i.e., from 6,000 flight hours to 2,500 flight hours). That action was prompted by a report from Boeing that the original compliance time was not adequate, because another incident of failure of an electric motor of the auxiliary hydraulic pump had occurred during the interval between repetitive inspections. The proposed actions are intended to prevent various failures of electric motors of the auxiliary hydraulic pump and associated wiring, which could result in fire at the auxiliary hydraulic pump and consequent damage to the adjacent electrical equipment and/or structure. Since the issuance of AD 2001-14-08, we also issued AD 2004-05-20, amendment 39-13515 (69 FR 11504, March 11, 2004), applicable to certain McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, and DC-10-40F airplanes; Model MD-10-10F and MD-10-30F airplanes; and Model MD-11 and MD-11F airplanes. That AD requires modification of the installation wiring for the electric motor operated auxiliary hydraulic pumps in the right wheel well area of the main landing gear, and repetitive inspections (at intervals not to exceed 2,500 flight hours) of the numbers 1 and 2 electric motors of the auxiliary hydraulic pumps for electrical resistance, continuity, mechanical rotation, and associated airplane wiring resistance/voltage; and corrective actions if necessary. That action was prompted by several reports of failure of the auxiliary hydraulic pump systems. The requirements of that AD are intended to prevent failure of the electric motors of the hydraulic pump and associated wiring, which could result in fire at the auxiliary hydraulic pump and consequent damage to the adjacent electrical equipment and/or structure.
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.